SUZHOU SANAO ELECTRONICS CO.,LTD.

Automatic ferrules crimping Machine

Short Description:

Model : SA-YJ300-T

Description: SA-JY300-TAutomatic Wire Strip twist ferrules crimping Machine is suitable for crimping a variety of loose tubular terminals onto cables,twisting function to prevent loose conductor when crimping,Not need change crimping dies for different size terminal .


Product Detail

Product Tags

Product Video

Product Introduction

Automatic Wire Strip twist ferrules crimping Machine. SA-JY300-T This wire stripping twisting pre-insulated terminal crimping machine is suitable for crimping a variety of loose tubular terminals onto cables,twisting function to prevent loose conductor when crimping,Not need change crimping dies for different size terminal .

* One machine Suitable for crimping a variety of loose tubular terminals onto cables, Not need change
crimping dies for different size tube .
* Wire stripping Twisting and crimping can be finished at one time, twisting function to prevent loose conductor when crimping ,
* LCD display, automatically adjust stripping depth and length, Very easy to operate .
* Vibrating plate feeding, saving time and effort, replacing terminals is convenient and quick

Machine parameter

Model SA-YJ300-T
Capacity Cable Stripping Twisting, Terminal Inserting and Terminal Crimping are finished in 2.5 seconds
Applicable specs 0.5mm2 – 2.5 mm2(Terminal conduit length should be less than 12mm)
4.0 mm2(Terminal conduit length should be less than 10mm)
Detect device detect lack of terminals
Power AC220V/50HZ single phase
Gas source 0.5-0.8Mpa (please use clean and dry air)
Dimensions L450mm x W350mm x H425mm
Weight about 40kg

  • Previous:
  • Next:

  • Write your message here and send it to us