SUZHOU SANAO ELECTRONICS CO.,LTD.

Computer Ultrasonic Wire Welding Machine

Short Description:

Model : SA-3030, Ultrasonic splicing is the process of welding aluminum or copper wires. Under the high-frequency vibration pressure, the metal surfaces rub against each other, so that the atoms inside the metal are fully diffused and recrystallized. The wire harness has high strength after welding without changing its own resistance and conductivity.


Product Detail

Product Tags

Product Video

Product Introduction

Ultrasonic Wire Splicing Machine  SA-3030 is the future-oriented method for wire and terminal applications. Among other things the process is used for joining multiple wires with each other as well as for joining wires with grounding terminals or high-current contacts.Compared with crimping or resistance welding, this process offers numerous advantages. Besides the excellent electrical properties of the joint and the extremely low energy consumption, this method is particularly characterized by comprehensive process control and process data management.The welding machine is a new industrial ultrasonic wire splice solution. It welds stranded, braided and magnet wires to create a wire splice, wire crimp or a battery cable splice. The connections it produces are used in the automotive, aircraft, computer and consumer electronics industries, as well as other process control and industrial instrument applications. It is most commonly used in the production of wire harnesses.

1.Automatic splice width adjustment from 0.5-20mm2 (depending upon power  level)

2.Microcomputer control, electronic tuning frequency.

3.Power adjustable, operate simple, and run stable and reliable.

4.LED display keeps the machine visible in operation and regulation.

5.Imported components, good performance in energy output.

6.Overcurrent protection and soft start can keep the machine safe.

7.Easy installation and operation.

8.Not only similar metal, but also dissimilar all can welding together. It can weld metal slice or sleave to thick metal. Usually used for transister or IC's leads welding.

Machine parameter

Model SA-HJ3030 SA-3040 SA-3065
Power 3000W 4000W 3000W
Welding area 0.5-20 mm2 0.5-30 mm2 0.5-40 mm2
Working air pressure 0.05-0.9MPa 0.05-0.9MPa 0.05-0.9MPa
Working frequency 20KHz 20KHz 20KHz
Working voltage 220V 220V 220V

  • Previous:
  • Next:

  • Write your message here and send it to us