Products
-
Wire harness shrinking ovens
SA-1040PL Heat shrinkable tube heater,is suitable for heating shrinkage of heat shrinkable tubes in wire harness processing enterprises, adjusting temperature according to the requirements of the production process, contraction time is short,can heat shrinkable tubes for any length, can work continuously for 24 hours without interruption.
-
Solar Connector screwing machine
Model:SA-LU100
SA-LU100 semi automatic Solar Conector screwing machine electric nut tightening machine,The machine uses servo motor, the torque of the connector can be set directly through the touch screen menu or the position of the connector can be directly adjusted to complete the required distance. -
Electric cutting stripping crimping machine
- Portable easy-to-operate electric terminal crimping tool crimping Machine ,This is an electric terminal crimping machine. It is small, lightweight and easy to carry. It can be used anywhere as long as it is connected to a power source. The crimping is controlled by stepping on the pedal, The electric terminal crimping machine can be equipped with optional Dies for different terminal crimping.
-
8 Shape Automatic Cable Winding Cutting and stripping Machine
SA-CR8B-81TH is full automatic cutting stripping winding tying cable for 8 shape,cutting and stripping length can be set directly on the PLC screen., Coil inner diameter can adjust , Tying length can be setting on machine , This is full automatic machine that not t need people to operate is It’s Greatly Improved cutting winding speed and save labor cost.
-
Copper Busbar heating machine Heat Shrink Tunnel
This series is a closed copper bar baking machine, suitable for shrinking and baking various wire harness copper bars, hardware accessories and other products with relatively large sizes.
-
Wiring harness shrink tubing heating oven
SA-848PL The machine uses far-infrared heating tube heating, double-sided heating, and two sets of independent temperature control system, temperature adjustable, up and down the heat shrinkage can be selected, the machine up and down the left and right are installed infrared heating tube, can be heated at the same time，suitable for wire harness heat shrink, heat shrink film packaging, circuit boards, inductor coils, copper rows, hardware accessories and other products.
-
Multi core cutting and stripping machine
Model : SA-810NP
SA-810NP is automatic cutting and stripping machine for sheathed cable. Processing wire range: 0.1-10mm² single wire and 7.5 outer diameter of sheathed cable , This machine adopts the belt feeding, compared with the wheel feeding feeding more accurate and does not hurt the wire. Turn on the inner core stripping function, you can strip the outer sheath and core wire at the same time. Can also be closed to deal with electronic wire below 10mm2, this machine has a lifting belt function, so the outer skin stripping length of the front can be up to 0-500mm, the back end of the 0-90mm, the inner core stripping length of 0-30mm.
-
Fully automatic terminal crimping machine with protective cover
Model : SA-ST100-CF
SA-ST100-CF Suitable for 18AWG~30AWG wire ,is Fully automatic 2 end terminal crimping machine ,18AWG~30AWG wire use 2- wheel feeding , 14AWG~24AWG wire use 4-Wheel feeding,Cutting length is 40mm~9900mm (Customized ) , Machine with English color screen is very easy operate.Crimping double end at one time , it’s Improved wire process speed and save labor cost.
-
Automatic IDC Connector Crimping Machine
SA-IDC100 Automatic Flat Cable Cutting and IDC Connector Crimping Machine,Machine can automatic cutting Flat cable , Automatic feeding IDC connector via vibrating discs and crimping at the same time,Greatly increase the production speed and reduce the production cost, The machine has an automatic rotating function so that different types of crimping can be realised with one machine. Reduction of input costs.
-
Real-time wire labeling machine
SA-TB1183 Real-time wire labeling machine,is one by one printing and labeling ,such as printing 0001,then labeling 0001, the labeling method is labeling not disorderly and waste label, and easy replace label etc.. Numerical control machine, adjustment is more convenient to achieve different specifications of wire products labeling .
-
Automatic PVC tubes cutting machine for Inline cutting
Model : SA-BW50-IN
This machine adopts the rotary ring cutting, the cutting kerf is flat and burr-free,This is an in-line pipe cut machine for use with extruders, machine suitable for hard PC, PE, PVC, PP, ABS, PS, PET and other plastic pipes cutting, suitable for the pipe’s The outer diameter of the pipe is 10-125mm and the thickness of the pipe is 0.5-7mm. Different pipe diameters for different conduits. Please refer to the data sheet for details
-
Automatic PET tubes cutting machine
Model : SA-BW50-CF
This machine adopts the rotary ring cutting, the cutting kerf is flat and burr-free, As well as the use of servo screw feed, high cutting accuracy, suitable for high-precision short tube cutting,machine suitable for hard PC, PE, PVC, PP, ABS, PS, PET and other plastic pipes cutting, suitable for the pipe’s The outer diameter of the pipe is 5-125mm and the thickness of the pipe is 0.5-7mm. Different pipe diameters for different conduits. Please refer to the data sheet for details.