SUZHOU SANAO ELECTRONICS CO.,LTD.

Servo Motor Terminal Crimping Machine

Short Description:

​SA-JF2.0T,1.5T / 2T Servo terminal crimping machine ,our models ranging from 2.0T to 8.0T,Different terminal different applicator or blades ,so Just change the applicator for different terminal ,This series of crimping machines is highly versatile


Product Detail

Product Tags

Product Video

Product Introduction

 

SA-JF2.0T,1.5T / 2T Servo terminal crimping machine ,our models ranging from 2.0T to 8.0T,Different terminal different applicator or blades ,so Just change the applicator for different terminal ,This series of crimping machines is highly versatile, and can crimp all kinds of cross-feed terminals, direct-feed terminals, U-shaped terminals flag-shaped terminals, double-tape terminals, tubular insulated terminals, bulk terminals, etc, When crimping different terminals only the corresponding crimping applicators need to be replaced. The standard crimping stroke is 30mm, and the standard OTP bayonet applicator is used to support quick applicator replacement. in addition, the model with 40mm stroke can also be customized, and the use of European applicators is supported. Color touch screen operation interface, the crimping stroke can be set directly in the program, no need to manually adjust the screw. The program memory function can save up to 20 sets of data, and the crimping parameters of different products can be saved in different programs. When changing the applicator, the corresponding parameters can be called out with one key.especially suitable for crimping a variety of different terminals with one machine occasion. The program has a built-in stroke measurement function, which can automatically measure the crimping stroke after the applicator is installed, which greatly saves debugging time. For the occasion of crimping different wires on the same terminal, this machine can also set multiple different crimping heights for cyclic crimping. The holding time can be set in the program, that is, when the applicator is pressed down to the lowest point, it can stay for a specified time and then lift up to ensure that the crimping size is stable. 1. Motor: Adopt servo motor with high precision, low noise and longer service life.
2. OPT Applicator : One machine is suitable for various terminals, Just change the applicator for different terminal.
3. Full English Display : Easy to operate .
4. Warranty : Machine with one year warranty, And free provide sample test and operate video guide .

 

Machine parameter

Model

SA-JF2.0T

SA-JF3.0T

SA-JF4.0T

SA-JF6.0T

SA-JF8.0T

Crimp Force

2.0Ton

3.0Ton

4.0Ton

6.0Ton

8.0Ton

Stroke

30mm (40mm custom avaliable)

Power Supply

110/220VAC,50/60Hz

Power

750W

1250W

1500W

1500W

2300w

Weight

40kg

62kg

65kg

132kg

135kg

Dimensions

24*27*65cm

24*27*65cm

31*21*75cm

38*31*85cm

38*31*85cm


  • Previous:
  • Next:

  • Write your message here and send it to us